Make your own Christmas lights

Table of contents:

Make your own Christmas lights
Make your own Christmas lights
Anonim

These days, you can't find or count the various Christmas lights in the markets. However, if we want to deviate even a little from the average, we can run into two obstacles: the first is that they ask for an incredibly high price, and the second is that none of them suit our taste.

For some reason, the light lines only contain the light bulbs, not other decorations. Of course, this is not such a big problem, but what if you also want small caps for the bulbs, which also have a special decorative value? Well, bring out the glue and the knife, because you'll be forced to do what you want yourself.

1. table tennis

The small balls are not expensive, and they also have some very good qualities: they are light, they do not collapse when you cut them, and the material is not too thick, so they will also be perfect for decorative purposes. First paint the small balls however you like, and when they are dry, carefully cut a small X on them with a snicker or a scalpel. Use this to push the small light bulbs inside and fix the balls with a drop of glue.

2. Lace

To make the lace decoration, you will also need a bag of water bombs. These are small balloons that can be blown up. Do this and then cut strips from the lace. Soak these in a mixture of starch glue - the mass should be very thick - then cover the balloons nicely with it. If so, you can apply the adhesive mixture with a lighter brush, but make sure that it gets everywhere. Let the little balls dry completely. To check, press it gently, and if you can't press it in, then something else will be fine. Deflate the balloons and take them out of the sphere, then push the bulbs in here. Just a drop of glue and you're done!

3. Thread

The principle is the same as for the lace ball, but here work with embroidery thread or thread. It will be a little more work, but very showy. Start wrapping the thread on the inflated balloon, but keep rotating the base to keep the spherical shape. If you have approximately one layer of thread, coat it thoroughly with a sticky, starchy mass. Count on two or three coats, and when dry, deflate the balloon and place the spheres on top of the burn line. If you don't want to mess around so much, you can also work with asparagus, but here you should also soak the thing to be rolled in the mass, because that's the only way it will keep its shape.

4. Toilet paper roll

It's unbelievable what this little thing is good for. Paint it white, iron it out, then fold the two ends in to make a small package. You can put a small bow on it, and by enlarging one of the small holes, the burner can also fit inside. Fix it with glue and you're done.

5. Plastic stampede

Do you have the soup available at fairs or small buffets, which are served in tiny plastic cups? Well, you can also decorate with the help of small glasses. You just have to paint them the way you want and cut the bottom in an X shape. In this case, also fix the bulb with glue. If you're lucky, you'll also find pre-colored glasses, but the result will be much more unique if you paint instead.

shutterstock 234360388
shutterstock 234360388

6. With glasses

If you don't like the plastic cup solution, you can also use small mason jars. Here you need to drill the roof and insert the light bulb. In this case, use more glue because the weight will be greater. While the adhesive of the small LED in the roof dries, paint the glasses in a single color, with a pattern, or just leave them alone. If you choose not completely round but, say, hexagonal glasses, it will still be showy.

Recommended: